SOFTPAQ NUMBER:  SP11045
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models PC Card Support for Windows NT 4.0 
VERSION:  2.12.005 Rev. A
LANGUAGE:  Swedish

CATEGORY:  Drivers

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada E700 6400/T14/14.0/V/M/3
		    Compaq Armada E700 6400/T14/14.0/V/0/3
		    Compaq Armada E700 6400/T14/14.0/V/M/1
		    Compaq Armada E700 6400/T14/14.0/V/0/1
		    Compaq Armada M700 6400/T14/10.0/V/M/3
		    Compaq Armada M700 6400/T14/10.0/V/0/3
		    Compaq Armada M700 6366/T14/6.4/D/M/3
		    Compaq Armada M700 6366/T14/6.4/D/0/3
		    Compaq Armada M700 6366/T13/6.4/D/M/3
		    Compaq Armada M700 6366/T13/6.4/D/0/3
		    Compaq Armada M700 6400/T14/10.0/V/M/2
		    Compaq Armada M700 6400/T14/10.0/V/0/2
		    Compaq Armada M700 6366/T14/6.4/D/M/2
		    Compaq Armada M700 6366/T13/6.4/D/M/2
		    Compaq Armada M700 6366/T13/6.4/D/0/2
		    Compaq Armada M700 6400/T14/10.0/V/M/1
		    Compaq Armada M700 6400/T14/10.0/V/0/1
		    Compaq Armada M700 6366/T14/6.4/D/M/1
		    Compaq Armada M700 6366/T14/6.4/D/0/1
		    Compaq Armada M700 6366/T13/6.4/D/M/1
		    Compaq Armada M700 6366/T13/6.4/D/0/1

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  July 21, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  NONE

DESCRIPTION:  Unpacks files needed to install the Armada 
Specific Models Compaq PC Card Support for Windows NT 4.0
for the models listed above in PRODUCTS AFFECTED.  
Optionally creates three installation diskettes.

This version is the initial release of this utility for the models
listed above.

Enhancements/Fixes:  N/A 

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory.  All files are unpacked into this
newly created directory.

To create the three optional installation diskettes, run MAKEDISK.BAT  and
follow on-screen instructions.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, follow the steps in the README.TXT file in created
directory.

5. After the installation is completed, you may delete the directory
created in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies