SOFTPAQ NUMBER:  SP10924
PART NUMBER:  NA
FILE NAME:  874-6.bin
TITLE:  Deskpro EP/EN Series Video ROM for Millennium G100 Graphics Controller 
VERSION:  1.6.00 Rev A
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Deskpro EP/EN Series with 
                    Matrox Millennium G100 Graphics Controller 
             NOTE:  To determine if your model has this controller --
                    In Windows 95/98, go to the Control Panel, then select the 
                    System icon, the Device Manager tab, and the Display 
                    adapters icon.
                    In Windows NT, go to the Control Panel, then select 
                    Display, Settings, Display type.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  Matrox Millennium G100 Graphics Controller 

EFFECTIVE DATE:  July 30, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP9577

DESCRIPTION:  This SoftPaq unpacks the files needed to install 
the video ROM for certain Deskpro EP/EN Series models that use a 
Matrox Millennium G100 Graphics Controller.  
Optionally allows an installation diskette to be created.  

IMPORTANT: The video ROM can only be installed from DOS Mode.  
             It cannot be installed from a DOS session (DOS window).

Enhancements/Fixes:
 - Fixes a problem with text corruption in Access 3270 when toggling to 
   a DOS session.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into a subdirectory named 
Disk_01 that is created under the download directory or the directory 
specified. 

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The video ROM may be installed directly from the files on the hard 
drive or an optional installation diskette can be created.  
To create an installation diskette, run MAKEDISK.BAT.

To install the video ROM, restart the computer in DOS Mode and
 choose one of the below installation options: 

IMPORTANT:  This must be run from DOS Mode (not a DOS session). 

  A:To install from the hard drive, enter:   <path>\disk_01\BIOS-6.BAT
     where <path> is the drive and directory chosen in step 2

   B:To install from the optional installation diskette, 
      enter: A:\BIOS-6.BAT
   
5. Follow the on-screen instructions to complete the installation.

6. After a successful installation, you may delete the files unpacked 
in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies