| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP10897 — Compaq Ethernet/Fast Ethernet Network Drivers for SCO OpenServer Release 5.x
| SoftPaq Number |
SP10897 |
| Filename |
SP10897.exe |
| Size |
1542K |
| Date |
June 24, 1999 |
| Version |
5.02.a for n100c, 1.01 for n1000 |
| Operating System |
SCO OpenServer Release 5.05 Enterprise |
| Products Affected |
Compaq server products using Intel-based NICs |
Readme
SOFTPAQ NUMBER: SP10897
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Ethernet/Fast Ethernet Network Drivers for SCO OpenServer Release 5.x
VERSION: 5.02.a for n100c, 1.01 for n1000
LANGUAGE: English
CATEGORY: Drivers
DIVISIONS: Comm-Network
PRODUCTS AFFECTED: Compaq server products using Intel-based NICs
OPERATING SYSTEM:
SCO OpenServer Release 5.05 Enterprise
SCO OpenServer Release 5.05 Host
SCO OpenServer Release 5.04 Enterprise
SCO OpenServer Release 5.04 Host
SCO OpenServer Release 5.02 Enterprise
SCO OpenServer Release 5.02 Host
SCO OpenServer Release 5.0 Enterprise
SCO OpenServer Release 5.0 Host
SCO Internet FastStart
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: June 24, 1999
SOFTPAQ UTILITY VERSION: 2.X
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: N/A
DESCRIPTION: Creates two diskettes to install the following drivers:
- Compaq n100c Intel-based NIC driver, supports 10/100 NICs
- Compaq n1000 Intel-based NIC driver, supports GIG NICs
IMPORTANT: Do not use or run Compaq Insight Management Agents (CIM) with this
SoftPaq! Undesirable results may occur!
Remove any network configuration that is present on these NICs using
NETCONFIG prior to this installation.
HOW TO USE:
1. Obtain two (2) 1.44-MB diskettes.
2. Download the SoftPaq to a directory on your hard
drive and change to that directory. The file that
is downloaded is SP10897.exe.
3. From that drive and directory, execute the SoftPaq file:
SP10897 [ENTER]
The following files should be created:
QRST5.EXE
CPQNICUS._01
CPQNICUS._02
README.TXT
4. After the files are created, you may delete the downloaded
file SP10897.exe if you wish.
5. To create the diskettes, run QRST5.EXE.
6. Run CUSTOM.EXE to install the drivers. Follow the SCO release notes and
the manual on software installation.
Copyright 1989-1999, Compaq Computer Corporation. All rights reserved.
Copyright 1991-1999, The Santa Cruz Operation, All rights reserved
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|