SOFTPAQ NUMBER:  SP10874
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Workstation ELSA POWERdraft Driver for AutoCAD R14
VERSION:  14.03 Rev A
VENDOR VERSION NUMBER: 14.03.05
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100, 6000, AP200, AP400, 
                    AP500, or SP700 using the GLoria-Synergy 3D Graphics 
                    Controller; 
                    Compaq Professional Workstation AP200, AP400, AP500, or 
                    SP700 using the GLoria-Synergy+ 3D Graphics Controller; 
                    Compaq Deskpro Workstation AP240 or AP250 using the 
                    Synergy II 3D Graphics controller; 
                    Compaq Professional Workstation AP200, AP400, 
                    AP500, AP550, SP700 or SP750 using the Synergy II 3D 
                    Graphics Controller.
NOTE:  These graphics controllers are standard equipment on selected 
Workstation models only, but could be an option installed on other models.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  GLoria-Synergy 3D Graphics Controller (PCI),
                       GLoria-Synergy+ 3D Graphics Controller (AGP), or
                       Synergy II 3D Graphics Controller

PREREQUISITES:  N/A

EFFECTIVE DATE:  December 13, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.X

SUPERSEDES:  N/A

DESCRIPTION:  Creates the 3-diskette set, "ELSA POWERdraft for AutoCAD R14," 
which contains the ELSA POWERdraft application driver for AutoCAD R14 for
Windows NT 4.0 for the above-mentioned Compaq Workstations.

Enhancements/Fixes:  
 - Adds supports for the ELSA Synergy II 3D Graphics Controller
 

HOW TO USE:

1.  Obtain 3 formatted 1.44-MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskettes 
in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To Install, see section 3 in the file README.TXT on the first diskette.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies