SOFTPAQ NUMBER:  SP10834
PART NUMBER:  N/A
FILE NAME:  KY043099.CAB
TITLE:  Professional Workstation AP200 ROM Image for Remote ROM Flash 
VERSION:  686W7_043099 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP200
		    
OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  June 21, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

PREREQUISITE:  Remote Management Setup

SUPERSEDES:  SP9990

DESCRIPTION:  Creates a cabinet file that contains a binary image for the 
04/30/99 System ROM in the Professional Workstation AP200.  The CAB 
file is used by Remote Management Setup to flash the System ROM on target 
Workstations on a network.

Enhancements/Fixes:
	
- Features new microcode patches for the Pentium III and Celeron processors.
- Corrects a condition where the system may fail to find USB hubs or high speed USB keyboards.
- Corrects a timing condition that caused the system BIOS to not find some USB devices that 
  were connected through a Compaq V1000 USB hub.
- Corrects a slow boot condition with newer CD-ROM drives that have drive shadowing, a new 
  ATAPI specification.  This caused longer than normal boot times.
- Corrects a condition with video option ROM's greater than 32KB that exist with other PCI 
  option ROM's in the system.  The condition caused a video hang with certain video cards.
- Corrects a condition with the IBM X.25 card when present with a PCI card featuring an option
  ROM that resulted in an error from the card's diagnostic program.
- Corrects a condition that was causing the system to hang when warm booted if a Powerstorm 
  300 video card was installed.
- Corrects a condition in F10 Setup for selecting the primary VGA card when two video cards are
  installed.
- Added DMI table update to allow maximum memory as 768 MB and maximum processor speed as 600 
  Mhz.
- Added fixes for the Matrox LE video capture card.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive. The file downloaded 
is a self-extracting executable.

2. Execute the downloaded file and follow the on-screen instructions.  The name
of the extracted file is KY043099.CAB.

3. After the CAB file has been created, you may delete the self-extracting file 
downloaded in step 1.

4. Refer to the Remote Management Setup documentation for instructions on 
creating a Remote ROM Flash job to flash the ROM on target Workstations on the 
network.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.