SOFTPAQ NUMBER: SP10800

PART NUMBER: 178178-001
PART NUMBER: 178179-001
PART NUMBER: 178180-001

FILE NAME: N/A

TITLE: Compaq Solaris Driver Update (DU) Diskette for Solaris 7

VERSION: 1.00

LANGUAGE: English

CATEGORY: Drivers

DIVISIONS: Systems

OPERATING SYSTEM: Solaris 7 Software

SYSTEM CONFIGURATION: Above operating system.

PREREQUISITES: N/A

EFFECTIVE DATE: March 31, 2000 

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: 2.x

SUPERSEDES: N/A

DESCRIPTION:

This  Softpaq  creates  Compaq Solaris Driver Update (DU) Diskette for
Compaq  SCSI,  Smart  Array  and  Fibre  Channel  Storage  Controllers
for Solaris 7

NEW FEATURES AND UPDATES: N/A

HOW TO USE:

1. Download the  Softpaq  to  an empty directory on  your  hard  drive
   and  change  to  that directory.  The file that  is  downloaded  is
   SP10800.EXE.

2. From that drive and directory, execute the Softpaq
   file:
        SP10800 [ENTER]

   The following files should be created:

        QRST5.EXE
        178178US._01
        178178US._02
        178178US._03
        SP10800.TXT

3. Obtain 3 formatted 1.44-MB diskettes.

4. To create the Driver Update (DU) diskettes, run QRST5  and  follow
   the on-screen instructions.

5. After the Driver Update (DU) diskettes are  created, you may delete
   the downloaded file SP10800.EXE and the other files created on your
   hard drive if you wish.

6. Each of the Driver Update (DU) Diskette have the following  Readme
   Files
   README.TXT -	This file can be best viewed under non-unix Operating
		System.
   ureadme    -	This file can be best viewed under Solaris  Operating
		System.
		Use the following commands to view  ureadme  file  on
		Solaris Operating System.
		Check to see if Volume Management is running 
		# ps -ef | grep vold
		If Volume Management is running stop the same.
		# /etc/init.d/volmgt stop 
		Insert the  Driver  Update  (DU)  diskette  into  the
		diskette drive.
		Mount the Driver Update (DU)  diskette  at  the  /mnt
		mount point:
		# mount -F pcfs /dev/diskette  /mnt
		Move to /mnt mount point.
		# cd /mnt
		Use vi command to open the ureadme file.
		# vi ureadme
   These README.TXT and ureadme files on Driver Update (DU) diskette,
   describes the procedure to load the Driver  Update  (DU) diskette.

COMPAQ CONTROLLERS SUPPORTED:

The Compaq Solaris Driver Update(DU) Diskette contains the following 
Device Drivers and the Supported Hardware.

Compaq SCSI Controller driver, "cpqncr", version 3.30 supports the
following Compaq SCSI Controllers

*  Compaq 32-Bit Fast-Wide SCSI-2 EISA/PCI Controller (825)
*  Compaq Wide-Ultra SCSI PCI Controller (875)
*  Compaq Dual Channel Wide Ultra SCSI-3 Controller (876)
*  Compaq Dual Channel Ultra-2 SCSI Controller (896)

Compaq Smart Array Controller driver, "smartii", version 2.20 
supports the following Compaq Array Controllers

*  Compaq Smart Array 221 Controller
*  Compaq Smart Array 3200 Controller
*  Compaq Smart Array 3100ES Controller
*  Compaq Smart-2DH Array Controller
*  Compaq Smart-2SL Array Controller
*  Compaq Smart-2P Array Controller
*  Compaq Smart-2E Array Controller

Compaq Fibre Channel Controller driver, "cpqfcs", version 2.00 
supports the following Compaq Fibre Channel Controllers

*  Compaq Fibre Channel Storage System - EISA/PCI
*  Compaq 64-Bit/66-MHz Fibre Channel Storage System - PCI

COMPAQ SERVERS SUPPORTED:

ProSignia 200,  ProSignia 300, ProSignia 500,  ProLiant 800,  
ProLiant 850R,  ProLiant 1200, ProLiant 1500,  ProLiant 1600,
ProLiant 1850R, ProLiant 2500, ProLiant 3000,  ProLiant 5000,
ProLiant 5500,  ProLiant 6000, ProLiant 6400R, ProLiant 6500,
ProLiant 7000,  ProLiant 8000, ProLiant 8500,  ProLiant ML530

Copyright 2000, Compaq Computer Corporation.
All rights reserved.

Product names mentioned herein may be trademarks and/or
registered trademarks of  their  respective  companies.