PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP10774

SP10774 — Compaq Server Diagnostics

SoftPaq Number SP10774
Filename sp10774.exe
Size 1122K
Date January 7, 2000
Version 10.28 Rev A
Operating System All
Products Affected Compaq Prosignia, ProLiant, and Systempro Servers.
Supersedes SP10740

  Download sp10774.exe  


Readme

SOFTPAQ NUMBER:  SP10774
PART NUMBER:  386577-049
FILE NAME:  N/A
TITLE:  Compaq Server Diagnostics 
VERSION:  10.28 Rev A
LANGUAGE:  German

CATEGORY:  Diagnostics-Setup

DIVISIONS:  Systems

PRODUCTS AFFECTED: Compaq Prosignia, ProLiant, and Systempro Servers.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  January 7, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP10740

DESCRIPTION:
Unpacks the files needed to create a bootable Compaq Server
Diagnostics diskette, which supports ALL currently shipping Systems Division  
server products.  It is installed on the Diagnostics Partition for those
systems which support it and have hard drives.  It is shipped as a
diskette on all other products.
A Compaq Server Diagnostics diskette contains programs that can perform the 
following tasks on Compaq Systems Division server products:
 - TEST 
 - INSPECT (display machine config) 


Enhancements/fixes:
 - Support for ProLiant ML360, ML530, and DL380.
 - Support for Compaq Smart Array 431.
 - Support for Remote Insight Lights-Out Edition.
 - Fixed false memory noise test failures on ProLiant 3000, 8500.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. To create the Diagnostics diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

4. After the Diagnostic diskette has been created, you may delete the  
self-extracting file downloaded in step 1, as well as the directory
folder and files created in step 2.

5. Power down the system.

6. Place the newly created Diagnostics diskette in Drive A:, and 
power up the system.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home