| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP10754 — Compaq DLT7000 Tape Driver for Microsoft Windows NT 4.0
| SoftPaq Number |
SP10754 |
| Filename |
sp10754.exe |
| Size |
153K |
| Date |
December 17, 1999 |
| Version |
1.6 |
| Operating System |
Windows NT 4.0 |
| Products Affected |
Compaq Servers that use a Compaq DLT2XXX, DLT4XXX, or DLT7XXX Tape Device |
| Supersedes |
SP8171 |
Readme
SOFTPAQ NUMBER: SP10754
PART NUMBER: N/A
FILE NAME: CDLT7N4I.SYS
TITLE: Compaq DLT7000 Tape Driver for Microsoft Windows NT 4.0
VERSION: 1.6
LANGUAGE: English
CATEGORY: Drivers
DIVISIONS: Miscellaneous
PRODUCTS AFFECTED: Compaq Servers that use a Compaq DLT2XXX,
DLT4XXX, or DLT7XXX Tape Device
OPERATING SYSTEM: Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: Intel Platform
PREREQUISITES: N/A
EFFECTIVE DATE: December 17, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 4.x
SUPERSEDES: SP8171
DESCRIPTION: This SoftPaq unpacks the files required to install
a Compaq DLT tape driver. Even though it displays as "Compaq DLT7000
Tape Drive", it supports the DLT2XXX, DLT4XXXX, and DLT7XXX tape
devices and will only work under Microsoft Windows NT 4.0, on an Intel
platform. To support all of our DLT4XXX tape devices, it is necessary
to use this tape driver, or the tape driver in SP10752. The driver in
SP10752 displays as "Compaq DLT4000 Tape Drive", and supports the same
tape devices. This driver, and the driver in SP10752 are functionally
equivalent. Which driver to choose should depend only on the display
preference (DLT7000 versus DLT4000).
For driver installation details, refer to README.TXT in the created
support files.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The downloaded file is a self-extracting
executable with a filename based on the SoftPaq Number above.
2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions to unpack the files.
The destination of the files to be created and total file size is
displayed. The current directory will be the destination directory.
The following files will be created:
CDLT7N4I.INF
CDLT7N4I.SYS
README.TXT
3. Read README.TXT for instructions on installation of the Compaq
DLT7000 Tape Driver.
4. After the files have been created, you may delete the downloaded
file from step 1 (sp10754.exe).
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|