PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP10753

SP10753 — Compaq DLT4000 Tape Driver for Microsoft Windows NT 4.0

SoftPaq Number SP10753
Filename sp10753.exe
Size 155K
Date December 17, 1999
Version 1.5
Operating System Windows NT 4.0
Products Affected Compaq Servers that use a Compaq DLT2XXX, DLT4XXX, or DLT7XXX Tape Device

  Download sp10753.exe  


Readme

SOFTPAQ NUMBER:  SP10753
PART NUMBER:  N/A
FILE NAME:  CDLTN4A.SYS
TITLE:  Compaq DLT4000 Tape Driver for Microsoft Windows NT 4.0
VERSION:  1.5
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Miscellaneous

PRODUCTS AFFECTED:  Compaq Servers that use a Compaq DLT2XXX,
                    DLT4XXX, or DLT7XXX Tape Device

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  Alpha Platform

PREREQUISITES: N/A

EFFECTIVE DATE:  December 17, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.x

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq unpacks the files required to install 
a Compaq DLT tape driver.  Even though it displays as "Compaq DLT4000
Tape Drive", it supports the DLT2XXX, DLT4XXXX, and DLT7XXX tape 
devices and will only work under Microsoft Windows NT 4.0, on an Alpha
platform.  To support all of our DLT4XXX tape devices, it is necessary
to use this tape driver, or the tape driver in SP10755.  The driver in
SP10755 displays as "Compaq DLT7000 Tape Drive", and supports the same
tape devices.  This driver, and the driver in SP10755 are functionally
equivalent.  Which driver to choose should depend only on the display 
preference (DLT4000 versus DLT7000).
 
For driver installation details, refer to README.TXT in the created 
support files.

 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
   to that directory.  The downloaded file is a self-extracting
   executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions to unpack the files.
   The destination of the files to be created and total file size is 
   displayed.  The current directory will be the destination directory.

The following files will be created:
       
       CDLTN4A.INF
       CDLTN4A.SYS
       README.TXT


3. Read README.TXT for instructions on installation of the Compaq 
   DLT4000 Tape Driver.

4. After the files have been created, you may delete the downloaded 
   file from step 1 (sp10753.exe).


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home