Softpaq Solution:  SP1061
File Name:      P/N 194181-002 
Title: Utilities and Display Driver Support for AutoCAD ADI using Compaq/WD90C24A Graphics Controller.
Version:  1.01 Rev A
Language: English
_______________________________________________________________________ 

CATEGORY:  Drivers / Video       

EFFECTIVITY DATE: 12-15-94

PRODUCTS AFFECTED: Elite and Contura 400 systems  

OPERATING SYSTEM:  MS-DOS 3.1 or greater

SYSTEM CONFIGURATION:  DOS

SUPERCEDES: SP0870 

DESCRIPTION:
Problems Corrected:

- Mouse confined to middle of screen in AutoCAD Rel 12.
 
- No Menu support for AutoCAD R12 driver. Added Menu24.MNU file, which contains specific commands unique to the WD drivers.
	
- In VGAMODE.EXE utility, the following on-line commands were removed:
   3-Way, Detect, and Datapath.

- Improved "?" on-line HELP listing with command description for VGAMODE.EXE.

- VESA.EXE TSR driver has been renamed to VESA24.EXE.

- New Chip detection code is added to detect 90C24A C's ID which is 92C24

HOW TO USE:  

1.  After downloading the SoftPaq, copy it to an empty directory and change to that directory. 

If downloaded in zipped format (.ZIP), unzip the file to create an executable:  PKUNZIP SP1061

2.  From that drive and directory, execute the SoftPaq file to unbind the primary files:  SP1061 [ENTER]

The following files should be created: 

QRST5.EXE
194181EN.*
LABEL1.LBL
README.TXT

3.  Obtain a formatted 1.44 MB diskette.

4.  To create the diskette and install the software, refer to README.TXT.