SOFTPAQ NUMBER:  SP10599
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Storage Agents - UnixWare 7
VERSION:  3.87
LANGUAGE:  English

CATEGORY:  Software Solutions

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Servers running SCO UnixWare 7

OPERATING SYSTEM:   SCO UnixWare 7.0.1 / SCO UnixWare 7.1.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  - Compaq Enhanced Feature Supplement (EFS) for
                  SCO UnixWare 7, Version 7.28


EFFECTIVE DATE:  September 2, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6245

DESCRIPTION:  Creates a diskette containing Compaq Storage
Agents - UnixWare 7, Version 3.87.

IMPORTANT:  Before installing, remove earlier versions of Compaq
Insight Management Agents for SCO UnixWare 7 or Compaq Storage
Agents - UnixWare 7, as explained below.

HOW TO USE:

Steps 1-5 are performed under DOS, Microsoft Windows 3.1, Windows95
or Windows NT.
Steps 6-10 are performed under SCO UnixWare 7.

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a clean directory on your hard drive and change
   to that directory.  The file that is downloaded is an executable with
   a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file
   and follow the on-screen instructions. Three files will be created:
   SP10599.TXT, SP10599._01 and QRST5.EXE.

4. Execute QRST5.EXE and you will be prompted to insert the formatted
   diskette in a drive to create the diskette containing Compaq Storage
   Agents - UnixWare 7.

5. After the diskette has been created, you may delete the
   SoftPaq file downloaded in step 2 and the files upacked in step 3.

6. To install the Compaq Storage Agents - UnixWare 7,
   log in as "root."

7. Check and remove installed versions of the following packages by
   issuing the commands :

      Compaq Storage Agents - UnixWare 7

      # pkginfo -l cmastor
      # pkgrm cmastor

    or

      Compaq Insight Management Agents for SCO UnixWare 7

      # pkginfo -l cim
      # pkgrm cim

8. Insert the newly created diskette into the SCO default diskette
   drive and execute the following command:

      # pkgadd -d diskette1 cmastor

   Follow the on-screen instructions.

9. Remove the diskette.

10. Restart the server to complete the installation.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies