PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP10423

SP10423 — Workstation ProLiant Storage System Driver for Windows NT 4.0

SoftPaq Number SP10423
Filename sp10423.exe
Size 1080K
Date October 18, 1999
Version 2.04.1.1
Operating System Windows NT 4.0
Products Affected Compaq Professional Workstations 5000, 6000, 8000, 5100, AP500, SP700

  Download sp10423.exe  


Readme

SOFTPAQ NUMBER:  SP10423
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Workstation ProLiant Storage System Driver for Windows NT 4.0
VERSION:  2.04 Rev A
SIGNIFICANT FILE VERSION:  2.04.1.1
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstations 5000, 6000, 8000, 5100, AP500, SP700

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  October 18, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.x

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq creates a set of files that provide 
support for the following subsystems and features of Compaq 
Professional Workstations:
 
   Compaq ProLiant Storage Systems

NOTE: This driver's Setup program will only install the driver 
if the Compaq Proliant Storage System is present on the target 
system. If the Setup program returns exit code (0x1), then the 
driver did not get installed.

ENHANCEMENTS/FIXES:
 - Adds support for Compaq System Software Manager (SSM).
 - Supports 15 drives and checks alarms for fan, temperature, and Hot Plug events.
 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.  The 
file that is downloaded is a self-extracting executable with a 
filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
setup command below to start the installation of Software.

	SETUP.EXE  [ENTER]

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home