| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP10409 — Workstation ELSA Gloria Synergy/Synergy+ Graphics Driver
| SoftPaq Number |
SP10409 |
| Filename |
sp10409.exe |
| Size |
3374K |
| Date |
October 18, 1999 |
| Version |
5.36.0.408 |
| Operating System |
Windows NT 4.0 |
| Products Affected |
Compaq Professional Workstations 5100, AP200, AP400, AP500, SP700 |
| Supersedes |
SP9999 |
Readme
SOFTPAQ NUMBER: SP10409
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Workstation ELSA Gloria Synergy/Synergy+ Graphics Driver
VERSION: 5.36 Rev B
SIGNIFICANT FILE VERSION: 5.36.0.408
LANGUAGE: English
CATEGORY: Drivers
DIVISIONS: Workstations
PRODUCTS AFFECTED: Compaq Professional Workstations 5100, AP200, AP400, AP500, SP700
OPERATING SYSTEM: Microsoft Windows NT 4.0
SYSTEM CONFIGURATION: GLoria-Synergy 3D Graphics Controller (PCI), or
GLoria-Synergy+ 3D Graphics Controller (AGP)
PREREQUISITES: Microsoft Windows NT Service Pack 4 (or higher)
EFFECTIVE DATE: October 18, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 4.x
SUPERSEDES: SP9999
DESCRIPTION: This SoftPaq creates a set of files for installing
the Windows NT 4.0 driver for an ELSA GLoria Synergy or Synergy+ Graphics
Controller in the Compaq Professional Workstations listed above.
IMPORTANT: You must install Microsoft Windows NT Service Pack 4 (or higher)
before you install the ELSA Gloria Synergy/Synergy+ Graphics Driver.
ENHANCEMENTS/FIXES:
- Adds support for Compaq System Software Manager (SSM).
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive. The
file that is downloaded is a self-extracting executable with a
filename based on the SoftPaq Number above.
2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for
the files, or default to the download directory.
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. From the directory in which the files are created, execute the
setup command below to start the installation of Software.
SETUP.EXE [ENTER]
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|