Softpaq:    SP1034
File name:  MDMCFG.EXE 
Part Number:  181640-001
Title:  PCMCIA Modem Enabler for DOS/Windows
Version:  1.01 Rev A

CATEGORY:  Software

EFFECTIVITY DATE:  23 November 1994

PRODUCTS AFFECTED:

      LTE Elite
      Contura 400
      Concerto

OPERATING SYSTEM:  DOS/Windows

SYSTEM CONFIGURATION: not applicable

DESCRIPTION: The program "MDMCFG.EXE" is a direct enabler for PCMCIA
modems used in a DOS or Windows environment. It handles configuration
of a modem in either PCMCIA slot of a Compaq portable computer, without
requiring loading of any PCMCIA software other than Socket Services.

Developed for use with Compaq PCMCIA modems, this enabler is also
compatible with other PCMCIA 2.01-compliant modems. (Specific popular
PCMCIA 2.0 modems are also supported, such as the Megahertz 14.4
Data/Fax modem with X-Jack.)

SUPERCEDES: None

HOW TO USE:

1. Obtain a formatted 720KB diskette.

2. If SoftPaq obtained on diskette, copy the SoftPaq file to a temporary
   directory on the hard drive and go to that directory:

     MD C:\ENABLER
     COPY A:\SP1034.EXE C:\ENABLER
     C:
     CD \ENABLER

   If SoftPaq downloaded from BBS, go to the directory where downloaded
   to:
      C:
      CD \ENABLER
      PKUNZIP SP1034.ZIP

3. From that drive and directory, run the SoftPaq utility to unbind the
   primary files.

   Type SP1034 (and press ENTER).

   The following files should be created:

     181640EN._01
     QRST5.EXE
     SP1034.DOC

4. Create the diskette image by running this command at the DOS prompt:

     QRST5 (and press ENTER)

5. The "Select Option for Creating Disk" prompt appears.  Choose the
   highlighted, default selection "All diskettes in the Set" by pressing
   ENTER.

6. The "You will need to have the specified number of each type(s) of
   pre-formatted media..." prompt appears.  It is asking for one 720 KB
   diskette.

Verify that you have a formatted 720 KB diskette and press ENTER to
accept and continue.

IMPORTANT: Only a 720 KB diskette can be used, other types of media
           cannot be substituted.

7. The "Enter Destination Drive" screen will appear.
   Insert a 720 KB diskette into drive [A] or [B]" prompt is given.
   (Either A or B will be included in the prompt, depending on where
   your 3.5 inch diskette drive is located.)

If the drive shown in the prompt is not the one you wish to use, change
the value by pressing either A or B.

To begin diskette creation, press ENTER.

8. A counter box will be displayed during creation showing status. The
   number of cylinders will count up to 80.

9. When QRST5 has completed, it will exit back to DOS.

10. At this point, the PCMCIA Modem Enabler diskette has been created
    and is ready to use.

11. Please view the README.TXT file on the newly created PCMCIA Modem
    Enabler Diskette for installation instructions and paramater settings.
_____________________________________________________________________________

Copyright 1994, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies