SOFTPAQ NUMBER:  SP10219
PART NUMBER:  118143-291, 118144-291
FILE NAME:  N/A
TITLE:  Workstation Millennium II/G200/G100 MMS Drivers for Windows NT 4.0J
VERSION:  4.06 Rev B
VENDOR VERSION NUMBER: 4.06.023 (Far East)
LANGUAGE:  Japanese, English

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100, 6000, 8000, AP200, 
	  	    AP400, AP500, or SP700 using the Millennium II Graphics 
		    Controller;		    
		    Compaq Professional Workstation AP200, AP400, AP500, or
		    SP700 using the G200 PCI or G200 AGP Graphics Controller;
		    Compaq Professional Workstation AP400, AP500, or SP700 
		    using the Productiva G100 MMS Graphics Controller
		    
	    NOTE:   These graphics controllers are standard equipment on selected 
		    Workstation models only, but could be an option installed
		    on other models.

OPERATING SYSTEM:  Microsoft Windows NT 4.0 Japanese

SYSTEM CONFIGURATION:  Millennium II Graphics Controller (PCI), 
                       Millennium G200 Graphics Controller (PCI or AGP), 
		       or Productiva G100 MMS Graphics Controller

EFFECTIVE DATE:  May 5, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP9592

DESCRIPTION:  Creates the two-diskette set, "Workstation Millennium 
II/G200/G100 MMS Drivers for Windows NT 4.0J."

Enhancements/Fixes:  

Display driver:
- The line drawing code has been modified for better performance (errorinit bit 
  support) with G200 boards.
- The memory sizes for DirectDraw are reported in bytes instead of pixels.
- Right clipping has been added in the multi-board text code for flat panel.
- A fix for the PixelVision code has been made.
- The overlay is now supported for flat panel.
- The clipper limit for AutoCAD has been removed in bCreateSurfaceRGB.
- The 2D bus mastering code has been reorganized.
- Bus mastering transfers now use RPL whenever possible.

Miniport driver: 
- The miniport driver is now VGA-compatible.
- BIOS tables have been added for FlatPanel.
- For Productiva G100 MMS, the minimum amount of memory is read from the PINS.
- The PINS checksum for Quad G100 slave chips is modified to take into account 
  the modification to the serial number, and bValidateBiosPin verifies the 
  checksum.
- Fix monitor page in Japanese language (Far East release).
- Fix text scrolling problem in Japanese NT.

HOW TO USE:

1.  Obtain 2 formatted 1.44-MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskettes 
in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To Install, see READMENT.TXT on the first diskette.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies