SOFTPAQ NUMBER:  SP10021
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Server Support for Microsoft Windows NT 4.0
        (Network Interface Controller Drivers)
VERSION:  2.12 Rev C
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  All Compaq Servers

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  May 24, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP9700

DESCRIPTION:  This SoftPaq creates two files -- a description file and a 
self-extracting executable file.  The self-extracting executable 
file contains Compaq Server Support for Microsoft Windows NT 4.0
that supports the following subsystems and features of Compaq Servers:
 
   Compaq Advanced Network Control Utility
   Compaq Ethernet or Fast Ethernet Controllers
        Compaq NC1120 Ethernet NIC		
	Compaq NC3120 Fast Ethernet NIC 		
	Compaq NC3122 Fast Ethernet NIC 		
	Compaq NC3131 Fast Ethernet NIC		
	Compaq NC3132 Fast Ethernet Module		
	Compaq NC3133 Fast Ethernet Module		
	Compaq NC3160 Fast Ethernet NIC		
	Compaq NC3161 Fast Ethernet NIC		
	Compaq NC6132 Gigabit Module		
	Compaq NC6133 Gigabit Module	
   Compaq Netelligent Family of Controllers
	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller	
	Compaq Netelligent 10 T PCI UTP Controller	
	Compaq Netelligent 10/100 TX PCI UTP Controller	
	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
	Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller	
	Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller	
	Compaq Netelligent 10/100 TX Embedded UTP Controller	    
   Compaq NetFlex-3 Family of Controllers
	Compaq NetFlex-3/P Controller   
	Compaq NetFlex-3/E Controller   
   Compaq Server Support Installation Utility
   Compaq Teaming and Configuration Utility

Enhancements/Fixes:

The release of the Compaq Server Support for Microsoft Windows 
NT 4.0 Version 2.12 Revision C primarily supports the following 
new products:

	Compaq NC3131 Fast Ethernet NIC
	Compaq NC3132 Fast Ethernet Module
	Compaq NC3133 Fast Ethernet Module
	Compaq NC6132 Gigabit Module
	Compaq NC6133 Gigabit Module
	Compaq Smart Array Redundancy Software

Compaq Ethernet, Fast Ethernet, or Gigabit Controller Driver
(N100NT.SYS, N1000NT4.SYS) 

	Updated the Compaq Ethernet or Fast Ethernet Controller Driver, 
	N100NT.SYS, from Version 3.27.00.001 to Version 4.29.01.0009, 
	which provides support for the following controllers:
	
		Compaq NC3131 Fast Ethernet NIC
		Compaq NC3132 Fast Ethernet Module
		Compaq NC3133 Fast Ethernet Module

	Added Version 1.05.00.1012 of the Compaq Gigabit Controller 
	Driver, N1000NT4.SYS, to support the following controllers:

		Compaq NC6132 Gigabit Module
		Compaq NC6133 Gigabit Module

Compaq Server Support Setup for Microsoft Windows NT 4.0(SETUP.EXE)
	Added new command-line support for the Compaq Smart Array 
 	Redundancy Software.
	This new support allows you install, update, and remove 
	the Compaq Smart Array Redundancy Software through the
	command line.  Refer to the Command-Line Installations section 
	for information about the command syntax.

	Added new command-line support for return codes.  This new support 
 	allows you to determine if a command-line update or installation 
 	succeeded or failed.  Refer to the Command-Line Return Codes section 
	for more information about this functionality.


For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
   to that directory.  The file that is downloaded is a self-extracting
   executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions to unpack the files.
   The number of files to be created and total file size is displayed.
   You will be given the chance to specify the target directory for 
   the files, or default to the download directory.
   The following files will be created:
       README.TXT
       NICS.EXE

3. After the files have been created, you may delete the  
   self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
   self-extracting executable:
       NICS.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
   software files to a folder on your hard drive and run the program 
   SETUP.EXE to install the software.


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.